Output Explorer

Every prompt in the paper, and what each model wrote back.

Answer a question about a scanned page from its OCR text. Scored by exact match and ANLS against the accepted answers.

13 of 5,330 prompts

Of which program is this study guide a part of?→ right decisions, right now / Right decisions, Right now Which system are marked with true dimensions?→ pinnacle system instrumentation / Pinnacle system instrumentation / all pinnacle system instrumentation What are the factors under-reaming of acetabulum dependent on?→ bone quality and the size of the acetabular component / Bone quality and size of the acetabular component Which under-ream is sufficient for smaller sockets?→ 1 mm under-ream / 1mm under-ream / 1 mm Which under-ream is required for larger sockets?→ 1-2mm under-ream / 1-2 mm / 1-2 mm under-ream Which bone accommodates a greater press-fit of the acetabular component?→ soft bone / Soft bone What is the diameter of a 54 mm trial shell?→ 54 mm in diameter / 54 mm Which acetabular shell is measured over Porocoat porous coating?→ pinnacle acetabular shell / Pinnacle acetabular shell / pinnacle / a 54 mm pinnacle acetabular shell What is the cavity size of 54mm Quickset grater?→ 54mm cavity / 54 mm What is the degree of graters,shell trials and actual Pinnacle shells?→ 180 degrees / 180 What is the number shown on the right top end of the document?→ d1971.6 / D1971.6 What is the heading of the document?→ DECONTAMINATION / Decontamination Who is the vendor?→ VWR / Vwr

Nearby prompts. All 5,330 DocVQA prompts

PromptDocVQA · pagekmwn0226_18.png

What is the diameter of a 54 mm trial shell?

OCR text of the page · 812 characters; the scanned image itself is not published

It is important to understand that all Pinnacle system
Under-reaming of the acetabulum is dependent on
instrumentation is marked with true dimensions. The
one quality and the size of the acetabular component.
graters, shell trials and actual Pinnacle shells are all
A 1 mm under-ream is usually sufficient in smaller
180 degrees (FIGURE 17).
sockets, while a larger socket may require 1-2 mm
under-ream. Likewise, soft bone will more readily
accommodate a greater press-fit of the acetabular
component than sclerotic bone.
FIGURE 17
180*
180
180
A 54 mm Quickset grater
A 54 mm trial shell is
A 54 mm Pinnacle acetabular
reams a 54 mm cavity.
54 mm in diameter.
shell is 54 mm in diameter
as measured over the
Porocoat Porous Coating.
17
Source: https://www.industrydocuments.ucsf.edu/docs/kmwn0226
P-01210-00018

System prompt · identical for every setup

Answer the question using only the OCR text from a single document page. Return only the answer, with no explanation. Preserve the answer wording from the OCR text when possible.

Expected answer

54 mm in diameter54 mm

Ours

Exact match

54 mm in diameter

Aux 2015

Exact match

54 mm

PiT-FT 2015

Wrong

Empty response.

ChronoGPT 2015

Wrong

P-01210-00018

Question: What is the diameter of a 54 mm trial shell?

OCR text: It is important to understand that all Pinnacle system Under-reaming of the acetabular component is dependent on instrumentation is marked with true dimensions.